Screwed Pleated Blind

The most classic and sturdy mounting method. Rail profiles are fixed to the frame, wall or ceiling with screws; works for years without loosening even with heavy fabrics.

Pleated Blind Installation

Key Features

Sturdiest Connection

Screw + plug connection does not loosen or sag even on heavy fabric and wide openings.

Suitable for Every Surface

PVC, aluminium, wooden frames; mounts with the same confidence on concrete walls and ceilings.

Long-Lasting

Contains no adhesive or spring parts; mounting stays as sturdy as the first day throughout the blind's life.

Wide Openings

The only reliable option for glass over 2 metres and dual-mechanism systems.

What Is Screwed Pleated Blind Mounting?

Screwed mounting is the most traditional and reliable mounting method where the top rail profile of the pleated blind is fixed to the window frame, wall or ceiling with the help of screws and plugs. Since the entire load of the blind is carried by the screw connection points, there is no sagging or loosening even with the heaviest blackout fabrics and wide openings.

Advantages of Screwed Mounting

  • Maximum sturdiness: Thanks to the mechanical connection, it is the most durable mounting type against impact, pulling and vibration.
  • Long life: Contains no wearing parts like adhesive or hooks; mounting life equals the life of the blind.
  • Suitable for every surface: Applies to all surfaces including PVC, aluminium, wooden frames; concrete, plaster walls and ceilings.
  • Wide openings: It is the only reliable option for glass wider than 2 metres and dual-mechanism systems.

What to Watch Out For?

Screwed mounting requires 4-6 mm diameter holes in the frame or wall; these marks remain when the blind is removed. When screwing into PVC frames, hitting the steel reinforcement sheet inside the profile strengthens the connection. On flat walls, the appropriate plug must definitely be used.

Price Impact

Screwed mounting comes with the standard rail system, so it does not create extra accessory cost; the main factor affecting price is the blind measurement and fabric selection. If you do the mounting yourself, there is no labour cost either.

Installation Steps

  1. 1

    Check the Measurement

    Hold the blind rail against the glass and mark the points to be screwed with a pencil; check left-right balance with a spirit level.

  2. 2

    Drill the Holes

    Drill 4-6 mm holes at the marked points in the frame or wall with a suitable bit; insert plugs for wall mounting.

  3. 3

    Fix the Brackets

    Tighten the mounting brackets with screws; make sure none is loose.

  4. 4

    Set the Rail

    Place the blind's top rail into the brackets and push gently until you hear a click.

  5. 5

    Adjust Cord Tension

    Test that the fabric opens and gathers evenly; if needed make a fine adjustment with the cord tensioning screw.

Hangi Durumlarda Tercih Edilir?

  • Wide openings with heavy fabrics
  • Places requiring wall and ceiling mounting
  • Blinds that will stay in the same place for years
  • Commercial spaces and offices
  • Intensive-use areas opened and closed frequently
Montaj Bilgisi

A drill, suitable screws/plugs and a spirit level are sufficient. Average installation time is 10-15 minutes. Screw holes remain; in rented homes consider adhesive or hooked alternatives.

Frequently Asked Questions

10.000+

Happy Customers

%98

Satisfaction Score

Custom Size

Custom Production Guarantee

81 Provinces

Delivery Across Turkey

100% Guaranteed

Custom-Size Compatible

Pull to refresh
Chat on WhatsApp