Installation and Application Terms
Pleated Blind mounting service covers careful application of custom-size products to suitable surfaces. Every area carries different technical conditions. Wall structure, frame format and access possibility may affect the result. Non-standard transactions may be charged additionally. Surface preparation and access conditions are customer's responsibility before mounting. Requests arising from product or application are examined with concrete records. Consumer's mandatory rights are reserved.
1. Purpose and Scope of Mounting Terms
This Mounting and Application Terms regulates application services offered by Pleated Blind. The text covers discovery, appointment, mounting and delivery processes. Products subject to order are subject to relevant sales provisions separately. Every service record is evaluated with its own conditions.
Pleated blind systems may require different methods according to application area. Screwed, adhesive or special solutions may create separate technical needs. Additional infrastructure may be needed in motorized systems. Every surface does not give the same result.
| Term | Definition | Application Equivalent |
|---|---|---|
| Pleated Blind | Brand offering product and mounting services | Order, appointment, application and support processes |
| Customer | Person requesting product or mounting service | Declaration of address, surface, access and contact information |
| Mounting | Process of fixing the product to the suitable area | Screwing, gluing, adjusting and checking |
| Discovery | Preliminary evaluation of application area | Measurement, surface check and technical suitability review |
| Additional Labor | Applications exceeding standard mounting scope | Additional preparation, disassembly, transport or special intervention |
2. Nature of the Service
Mounting service means the application of the product to the determined area. Service scope is shown in order summary. Discovery, measurement or mounting may be charged separately. Offered service may vary according to region.
Pleated Blind may not give standard mounting commitment in areas it does not deem suitable. Alternative solution may be suggested in risky surfaces. Applicability is examined with technical records. Safe application is prioritized.
Basic Elements of Mounting Service
- Examination of application area
- Evaluation of surface suitability
- Comparison of the product with order record
- Determination of mounting method
- Preparation of necessary equipment
- Fixing of the product
- Movement check
- Review of final appearance
- Giving basic usage information to customer
3. Mounting Region and Service Suitability
Mounting service may not be offered in every province or district. Suitability is confirmed over address information. Transportation distance is also evaluated. Different fee may be applied for requests outside the region.
Creation of appointment does not mean service guarantee. Technical obstacles may be noticed during application. Transaction may be stopped in situations affecting safety. Alternative solution may be shared separately.
| Service Status | Evaluation | Possible Result |
|---|---|---|
| Standard Service Region | Address suitability is verified. | Appointment may be planned. |
| Out-of-Region Request | Distance and team plan are examined. | Additional transport fee may arise. |
| Risky Application Area | Safety conditions are evaluated. | Mounting may be postponed or rejected. |
| Special Architectural Area | Technical solution need is determined. | Discovery or special offer may be needed. |
4. Appointment Process
Mounting appointment is created taking the suitability of the parties into account. Date and time information is shared with the customer. Traffic or transportation conditions may affect arrival time. Communication may be established in case of delay.
Customer must be present in the application area on appointment date. An authorized person may also make the acceptance transaction. If access cannot be provided, new planning may be needed. Revisiting may be charged additionally.
Pre-Appointment Checklist
- Verify the delivery address.
- Keep your phone number current.
- Leave the application area accessible.
- Move fragile items to safe area.
- Move furniture away from working distance.
- Notify building entrance rules if any.
- Share parking or cargo elevator information.
- Have authorized person present at appointment time.
5. Preparation of Application Area
Customer must make the mounting area ready before transaction. Furniture must be moved to appropriate distance. Curtain, decoration product or fragile item must be removed. Working path must be left open.
Infrastructure must be prepared beforehand in systems requiring electricity. Lines inside the wall must be notified within customer's knowledge. Hidden installations must also be marked. Invisible infrastructure risks may belong to customer.
| Preparation Area | What the Customer Must Do | Possible Result in Case of Deficiency |
|---|---|---|
| Furniture | Must be moved away from working area. | Mounting may be delayed. |
| Fragile Item | Must be moved to safe area. | Damage risk may increase. |
| Electricity Line | Location must be notified if any. | Additional technical review may be needed. |
| In-Wall Installation | Known lines must be marked. | Application method may change. |
| Access Path | Obstacles must be removed. | Transaction may be postponed. |
6. Surface Suitability
Mounting success is not only dependent on the product. Application surface must carry sufficient durability. Paint, plaster or coating must not be loose. Moist surfaces may affect adhesion.
Glass, PVC, aluminum, wood and wall surfaces may behave differently. Every material is not suitable for the same fixing method. Technical team examines the surface before transaction. If necessary, different solution is offered.
Evaluation According to Surface Types
| Surface Type | Element to Check | Possible Application |
|---|---|---|
| PVC Frame | Profile width and movement distance | Screwed or suitable alternative mounting |
| Aluminum Profile | Cross-section structure and carrying area | Fixing according to technical suitability |
| Glass Surface | Cleaning, dryness and access | Adhesive solution with suitable system |
| Wooden Surface | Durability, moisture and coating status | Fixing suitable for surface |
| Painted Wall | Plaster integrity and surface firmness | Screwed mounting or alternative solution |
| Ceramic Coating | Joint structure and crack risk | Careful application or special equipment |
7. Mounting Methods
Mounting method is determined according to product structure and surface features. Customer preference may not be sufficient alone. Safety and durability are evaluated together. Unsuitable method may not be applied.
7.1. Screwed Mounting
Screwed mounting mechanically connects the product to the fixed surface. Surface durability is examined beforehand. Drilling points are determined according to technical requirements. Hidden installation information must be shared by customer.
7.2. Adhesive Mounting
Adhesive solutions require clean, dry and suitable surface. Dust, oil or moisture may reduce adhesion. Additional waiting period may be needed in newly painted areas. Not every coating provides the same performance.
7.3. Special Applications
Skylights, triangular windows or sloped areas are also examined. Standard equipment may not be sufficient. Special part may be needed. Additional labor fee may be notified beforehand or during application.
| Mounting Type | Advantage | Limitation | Control Requirement |
|---|---|---|---|
| Screwed Application | Provides mechanical fixing. | May require drilling transaction. | Surface durability is examined. |
| Adhesive Application | May reduce drilling need. | Not suitable for every surface. | Cleaning and dryness are checked. |
| Special Profile Solution | May be adapted to architectural differences. | Additional part may be needed. | Technical offer may be prepared. |
| Motorized System | May provide remote usage. | Electricity infrastructure may be needed. | Connection conditions are evaluated. |
8. Relationship Between Measurement and Production
Mounting service is planned for products prepared with correct measurements. Dimensions given by customer are also important. Wrong measurement may affect application success. Incompatibility is not always counted as mounting fault.
If professional measurement service has been received, relevant records are examined. If customer measurement has been used, declared values are the basis. Custom production products may not be evaluable in other areas after cutting. Measurement record is decisive.
Responsibility Review According to Measurement Sources
| Measurement Source | Basic Record | Possible Evaluation |
|---|---|---|
| Customer Declaration | Measurements in order form | Wrong declaration is examined separately. |
| Pleated Blind Discovery | Technical measurement record | Service scope is taken into account. |
| Third-Party Measurement | Information transmitted by customer | Third-party responsibility may be evaluated. |
| Surface Changed Later | Records before and after mounting | New discovery may be needed. |
9. Standard Mounting Scope
Standard mounting covers application of the product to ready area. Renovation works not notified beforehand are not included. Electricity line installation is evaluated separately. Wall repair may remain outside the service.
Transactions That May Be Included in Standard Scope
- Comparison of the product with order record
- Final check of application area
- Determination of suitable method
- Fixing with standard equipment
- Testing product movement
- Sharing basic usage information
- Review of final appearance
Transactions Not Included in Standard Scope
- Electricity line installation
- Wall breaking
- Plaster or paint repair
- Furniture disassembly
- Glass replacement
- Scaffold setup
- Crane or platform provision
- Disassembly of other products
- Architectural renovation
- Repair of third-party equipment
10. Additional Labor and Extra Fees
Non-standard needs may arise during mounting. These needs may not be foreseen beforehand. No additional transaction is made without customer being informed. If approval is not given, standard scope may suffice.
Additional labor fee may be determined according to duration, material and equipment need. Transportation conditions may also be effective. Special access equipment may create different fee. Additional services are applied after clear approval.
| Additional Service | Why May It Be Needed? | Pricing Approach |
|---|---|---|
| Old Product Disassembly | Preparing the new mounting area | Separate labor fee may be applied. |
| Special Profile Use | Standard surface being insufficient | Material and labor may be calculated separately. |
| High Area Application | Standard ladder being insufficient | Platform or equipment fee may arise. |
| Additional Visit | Area access not being provided | Re-service fee may be applied. |
| Out-of-Region Transport | Exceeding standard service limit | Fee may be determined according to distance. |
11. Customer's Responsibilities on Mounting Day
Customer must deliver the working area ready. Authorized person must be at the address. Building management permits must be obtained beforehand. Pets must be kept in safe area.
What the Customer Must Fulfill
- Be at the address at appointment time.
- Leave the working area accessible.
- Move valuable items to safe place.
- Share hidden installation information.
- Complete building entrance permits.
- Transmit parking information if any.
- Keep children away from working area.
- Keep pets in safe area.
- Examine mounting result at end of transaction.
12. Safety Conditions
Mounting team may stop the transaction in situations endangering safety. Application may not be made in high areas without suitable equipment. Wet floors may create risk. If there is electricity danger, transaction may be postponed.
Customer must notify known risks in working area beforehand. Health-harming environments are evaluated separately. If there is safety violation, new appointment may be planned. Additional cost may arise.
| Risk Type | Example Situation | Possible Transaction |
|---|---|---|
| Height Risk | Area exceeding standard ladder limit | Platform or special equipment may be requested. |
| Electricity Risk | Open cable or unclear connection | Mounting may be postponed. |
| Floor Risk | Wet or slippery working area | Area must be made safe. |
| Installation Risk | Hidden line inside the wall | Alternative fixing method may be evaluated. |
13. Situations That May Arise During Application
New findings related to surface structure may arise during mounting. Plaster gap may be noticed later. Profile curvature may affect application. Hidden installation risk may be seen.
Technical team notifies the new situation to customer. Alternative method may be suggested. Additional material may be needed. Transaction may be stopped if not safe.
Alternatives That May Be Evaluated During Application
- Using different fixing point
- Applying special profile
- Adding additional support part
- Choosing screwed solution instead of adhesive method
- Offering suitable alternative instead of screwed method
- Creating new discovery appointment
- Postponing mounting due to safety
14. Post-Mounting Check
When application is completed, product is checked with its basic functions. Opening and closing movement is tested. Visual integrity is examined. Usage information may be transmitted to customer.
Customer must notify significant problems at end of mounting. Requests noticed later must be transmitted in writing. Photo or video may be requested. Concrete record facilitates review.
| Check Point | Element to Examine | Expected Result |
|---|---|---|
| Movement Check | Opening and closing transaction | Product must work normally. |
| Fixing Check | Connection points | Product must be fixed to suitable surface. |
| Visual Check | Profile and fabric appearance | No significant production or mounting error must exist. |
| Usage Information | Basic opening, closing and maintenance rules | Necessary information may be transmitted to customer. |
15. Usage and Maintenance
Product must be used carefully after mounting is completed. Sudden pulling movements must be avoided. Excessive pressure must not be applied to fabric. Children hanging on the product must be prevented.
Cleaning transactions must be made with suitable methods. Hard chemicals may damage the fabric. Profile surfaces must not be cleaned with abrasive materials. Product must not be used outside its purpose.
Basic Usage Rules
- Move the product in a controlled manner.
- Do not let cutting object contact fabric.
- Do not force the profile.
- Do not use intensive chemicals.
- Prevent children from hanging on the product.
- Prevent pets from damaging the fabric.
- Get technical support in case of failure.
16. Unauthorized Interventions
Unauthorized interventions made after mounting may affect the product. Disassembling the profile may break the settings. Cutting the fabric may change warranty review. Third-party transactions are evaluated separately.
If product will be moved to another area, technical support must be received. New measurement need may arise during transport. Old connections may not fit the new surface. Unauthorized interventions may affect responsibility review.
| Intervention Type | Possible Result | Recommended Approach |
|---|---|---|
| Disassembling the Profile | Setting and fixing problems may arise. | Technical support must be received. |
| Cutting the Fabric | Product may become unusable. | Intervention must not be made. |
| Changing the Connection Point | Carrying durability may decrease. | Authorized evaluation must be requested. |
| Third-Party Repair | Technical review may become difficult. | Contact with Pleated Blind must be established first. |
17. Defective Service and Notification Process
Mounting service must be offered in a manner suitable for agreed features. If defect is thought to exist in service, written notification must be made. Request is examined with technical records. Photo or video may be requested.
Consumer's rights arising from current legislation are reserved. Re-performance or free repair options may be evaluated. Price reduction or withdrawal from contract request may be examined additionally. Mandatory rights are preserved.
Information Needed for Technical Review
- Specify the order number.
- Write the mounting date.
- Explain your request clearly.
- Add photos of the relevant area.
- Share video record if any.
- Verify your contact information.
- Send to info@pliseperde.com.
| Request Type | Review Basis | Possible Solution |
|---|---|---|
| Fixing Problem | Surface and mounting record | Technical check or re-application |
| Product Movement Problem | Video and usage record | Adjustment, repair or technical evaluation |
| Surface-Caused Problem | Application area photos | Alternative solution or additional labor |
| Unauthorized Intervention | Current product status | Separate technical evaluation |
18. Evaluation of Responsibility
Every request is examined taking the conditions of the event into account. Product defect and surface problem are separated from each other. Customer declarations are compared with technical records. Third-party interventions are evaluated separately.
Pleated Blind fulfills its responsibilities arising from its own fault according to legislation. Customer's erroneous declaration is examined separately. Hidden installation information is important. Parties' responsibility is determined with concrete records.
Records That Can Be Used in Responsibility Review
- Order summary
- Measurement records
- Discovery notes
- Appointment correspondence
- Pre-mounting photos
- Post-mounting visuals
- Customer notifications
- Technical team evaluation
- Delivery or service form if any
19. Appointment Cancellation and Revisit
Customer must notify appointment change request within reasonable time beforehand. Late notification may affect team plan. Inability to access the address may require revisiting. Additional service fee may be applied.
Customer is informed in changes caused by Pleated Blind. New date may be planned together. Traffic or extraordinary situations are taken into account. Parties must keep communication channels open.
| Situation | Possible Transaction | Possible Fee |
|---|---|---|
| Customer Unreachable | New appointment may be created. | Additional service fee may be applied. |
| Address Inaccessible | Mounting may be postponed. | Revisit fee may arise. |
| Area Not Ready | Transaction may be stopped. | Additional labor or service fee may be applied. |
| Pleated Blind-Caused Change | New date is planned. | Evaluated according to situation. |
20. Force Majeure and Unexpected Situations
Events beyond parties' control may affect appointment plan. Natural disasters may block transportation. Dense traffic may create delay. Public decisions may change service flow.
Energy interruptions may affect motorized system applications. Supply problems may delay additional part need. Customer is informed via suitable channels. New date may be shared separately.
Force Majeure Examples
- Earthquake, flood or fire
- Dense snowfall
- Transportation interruption
- Pandemic disease
- Public authority decision
- Energy interruption
- Strike or operation disruption
- Extraordinary situations affecting safety
21. Contact Information
| Channel | Information | Purpose of Use |
|---|---|---|
| Company / Brand | Pleated Blind | Mounting, application and support processes |
| Phone | +90 540 336 3873 | General information |
| +90 540 336 3873 | Appointment, written support and visual sharing | |
| info@pliseperde.com | Official requests and technical notifications | |
| Address | Esenyalı Mah. Edebali Cad. No:13/C, 34903 Pendik/Istanbul | Written notifications |
22. Social Media Channels
Social media accounts may be used for product promotion purposes. Official technical requests must be submitted via email. Appointment changes are finalized with written confirmation. Social media messages may not be sufficient alone.
- Facebook: facebook.com/FenetreSystems
- Instagram: instagram.com/fenetresystems
- X: x.com/fenetresystems
- YouTube: youtube.com/@FenetreSystems
- Pinterest: tr.pinterest.com/fenetresystems
- LinkedIn: linkedin.com/company/fenetresystems
23. Relationship with Other Texts
This terms is applied together with other policies and contracts. In case of conflict, mandatory legislation provisions are the basis. Written records specific to order are also taken into account. Technical offers are complementary in nature.
- Order and Custom Production Terms
- Distance Sales Contract
- Preliminary Information Form
- Measurement Information
- Warranty and After-Sales Support Policy
- Return, Exchange and Withdrawal Right Policy
- Delivery and Shipping Policy
- Privacy Policy
- KVKK Illumination Text
24. Entry into Force and Updates
This Mounting and Application Terms enters into force on June 12, 2026. Legislative changes may be reflected in the text. Operational arrangements may be updated separately. Current version is published on the website.
Version in force on appointment date is taken into account for the relevant transaction. Written offer specific to order may be applied additionally. Customer must examine the current text. Current record is preserved.
| Document Information | Value |
|---|---|
| Document Name | Mounting and Application Terms |
| Brand | Pleated Blind |
| Entry into Force Date | June 12, 2026 |
| Version | 1.0 |
| Contact | info@pliseperde.com |