How to Replace a Pleated Blind Cord?

How to Replace Pleated Blind Cord?
The carrier cords (strings) of the pleated blind are the most worn part of the system. Every time the blind opens and closes, the cords rub inside the fabric holes and guide channels; UV light also makes the material brittle over time. When the cord breaks, the blind loses function.. But if the rest of the system is intact, cord replacement alone is sufficient. The process takes 30-60 minutes on average and requires no special tools.
Tools Needed
- Replacement cord kit (matching your blind's specifications)
- Small flathead screwdriver
- Pliers or cord gripper
- Scissors
- Stepladder (for high windows)
Step-by-Step Cord Replacement
- Remove the blind: Follow the removal procedure for your mounting type.
- Access the cord channels: Remove the bottom rail cover to expose the cord tensioning mechanism.
- Release old cord: Loosen the cord from the tensioning spring and pull it out through the fabric holes.
- Thread new cord: Feed the new cord through the same path — through the top profile, down through the fabric holes, and into the bottom rail.
- Tension and secure: Pull the cord taut and secure it in the tensioning mechanism. Trim excess cord.
- Test: Reinstall the blind and test operation several times.
Cord Types
| Cord Type | Characteristics | Best For |
|---|---|---|
| Polyester cord | Durable, UV-resistant | Standard applications |
| Stainless steel cable | Maximum strength | Large/heavy blinds |
| Clear cord | Discrete appearance | Light-colored fabrics |
When to Replace
Replace cords when you notice fraying, discoloration, or when the blind doesn't stay in position. It's better to replace cords proactively than to wait for breakage — a broken cord can damage the fabric and mechanism.
Frequently Asked Questions


