How to Measure for a Pleated Blind?

16 Temmuz 2026 {{ count }} views
Step-by-Step Pleated Blind Measurement
Pleated blind is a custom-made system that fits the glass or frame to the millimeter. Even a 1-2 millimeter error can cause the blind to leak light from the edges or not fit the frame. That's why measuring is the most critical stage of ordering. The correct method varies by window type — we explain step by step for each case below.
Before You Start: Tools
- Steel tape measure (minimum 5 meters for large windows)
- Pencil and paper
- Spirit level (for checking window squareness)
Inside Mount Measurement
- Measure the width at three points: top, middle, bottom. Use the narrowest measurement.
- Measure the height at three points: left, center, right. Use the shortest measurement.
- Check if the window is square: measure diagonally both ways. If the difference is more than 5mm, note it.
- Measure the glass rebate depth — needed for frame-mounted (Perfect Fit) systems.
Outside Mount Measurement
- Measure the width you want the blind to cover — typically add 5-10cm on each side for light blocking.
- Measure the height similarly — add 5-10cm top and bottom if needed.
- Note any obstructions (handles, tiles, window sills) that might affect mounting.
Special Cases
| Window Type | Measurement Note |
|---|---|
| Sloped/roof windows | Measure perpendicular to the slope, note the angle |
| Triangular/trapezoid | Measure all sides and angles, custom production required |
| Door windows | Check if blind interferes with door handle |
| Double-glazed units | Measure inside the glazing unit, not the frame |
Common Measurement Mistakes
- Using a fabric tape measure instead of steel — fabric stretches and gives wrong readings
- Measuring only once — always measure at multiple points
- Forgetting to subtract frame depth for inside mount
- Not accounting for window handles or obstructions
Frequently Asked Questions


